Seven families covering frameless, modular, housed, standard rotary, linear, pancake and fully custom designs — 0.16 to 800 N·m, up to 10,000 RPM.
Rotor and stator only — drop the motor directly into your own mechanics.
View range
A motor module with its own bearing and mounting interface.
View range
Fully enclosed rotary axis with flange mounting and a hollow or solid shaft.
View range
Conventional rotary servo motors for the axes where direct drive is not the answer.
View range
Ironless and iron-core linear motors for zero-backlash linear axes.
View range
Flat axial-flux motors for tight axial space.
View range
Modified and clean-sheet designs built around your load case.
View rangeSend the drawing and the duty cycle. We will tell you whether a catalogue part or a custom design is the cheaper answer — including when the right answer is not direct drive at all.
How custom engineering worksThese are the parameters shared across the range. A specific model is sized to your load case — the figures below are the envelope we can work inside.
| Parameter | Value |
|---|---|
| Rated (stall) torque | 0.16 – 800 N·m |
| Maximum speed | up to 10,000 RPM |
| Bus voltage | 75 VDC · 120 VAC · 240 VAC · 400 VAC · 480 VAC |
| Mounting standard | Complies with common European, North American and Japanese machine mounting standards |
| Feedback | Multiple encoder and resolver options |
| Torque smoothness | Low cogging-torque design with low harmonic-distortion magnets |
| Mechanical options | Multiple connector styles · shaft seal · holding brake |
These are part numbers from our current catalogue. Per-model torque, speed and dimensional data are issued as a datasheet — ask for the one matching your application.
Send the drawing and the duty cycle. We will tell you whether a catalogue part or a custom design is the cheaper answer.
Ask an engineerTell us the model or the load case — either works.
